首页 > 考试辅导 > 外语考试 > 英语词汇 > 专业英语词汇 > 机械英语词汇 > 铸造学专业英语词汇(19)

铸造学专业英语词汇(19)

干燥托板 drying plate
浅出(金属) splash
浅砂 spillage sand ,spilling sand
潜变 creep
潜变速率 rate of creep
潜变限度 creep limit
潜热 latent heat
嵌合模型 fog quenching
嵌模板 odd side board
嵌入 bedding in
嵌入,内冷铁 insert
嵌入心型(压铸) knock-out core
强度 strength
强化砂心头 strengthened core print
强力砂 strong sand
强力铸铁 high duty cast iron
强性黏土 soapy clay
墙装旋臂吊车 wall creeper type jib crane
墙装旋臂吊车 wall jib crane
敲锤 rapping hammer
敲杆 rapping bar
敲落员 knock off personnel
敲模器 rapper
敲松间隙(拔模型用) block print clearance
敲陷 breaking in
敲型过度 excess rapping
壳模 shell mold
壳模吹造机 shell mold blower
壳模对合机 shell mold seatler
壳模法 shell molding
壳模模型 shell pattern
壳模砂心 shell core
壳模压合机 shell mold press
壳模造模机 shell molding machine
壳模铸件 shell mold castings
翘曲 warp
翘曲 warp warpage
翘曲 warping
翘曲模型 warped pattern
切断机 cut-off machine
切断机 cutter
切断用砂轮 abrasive cut-off wheel
切断用砂轮,轮刀 cutting wheel
切割砂轮 slitting wheel
切线流道 tangential runner
切削性 machinability
切消袷度 machining allowance
切屑 borings
切屑 chip
青铜 bronze
氢(h) hydrogen
氢脆性 hydrogen embrittlement
清(清砂、去毛边等) fettle
清理 fettling
清理场 cleaning room
清理场 fettling shop
清理工 fettler
清理工具 cleaning tool
清理工具 fettling tool
清理门 fettling door
清理设备(金属表面) metal cleaning equipment
清漆,假漆 varnish
清砂,脱砂 sand strip
清砂格子 knock-out grid
清砂式输送机 knock-out grate conveyer
清水砂 free sand
清箱,清箱处 knock-out
清箱机 knock-out machine
清箱台 knock-out table
清箱员 knock-out personnel
清渣孔 poking hole
清渣门(熔炉) clean-out door
倾斜浇模 incline molding
倾卸车 tipping wagon(tipper)
倾卸箱(壳模法) dumping box
倾注杆 tilting lever
倾注浇桶 tilting ladle
倾注台 tilting cradle
倾转架 tilting structure
倾转浇铸法 inversion casting
倾转炉 tilting furnace
轻合金 light alloy
轻金属 light metal
轻敲,起模 rapping
氰氮化钙,黑肥 calcium cyanamide
氰化处理 cyaniding
丘砂,河海丘砂 dune sand
球[状石]黑铸铁 sg iron(spheroidal graphite cast iron)
球[状石]墨 globular graphite
球[状石]墨 nodular graphite
球[状石]墨 spheroidal graphite
球[状石]墨 spherulitic graphite
球[状石]墨粒数 nodule count
球[状石]墨铸铁 nodular cast iron
球[状石]墨铸铁 nodular graphite cast iron
球[状石]墨铸铁 nodular iron
球[状石]墨铸铁 spheroidal[graphite cast] iron(s.g.iron)
球[状石]墨铸铁 spherulitic [graphite cast]iron
球承式模板 ball bearing floating plate ,die csting
球化处理 spheroidizing
球化剂 nodulant
球化剂 nodularizer
球击硬化 peen hardening
球面镘刀 spoon trowel
球磨粉机 ball mill
球墨铸铁用生铁 nodular pig iron
球状波来铁 granulated slag
球状波来铁 spheroidized pearlite
球状化 spheroidization
球状体 spheroid
球状雪明碳铁 spheroidal cementite
球状雪明碳铁 spheroidite
球状雪明碳铁 spheroidized cementite
区,带,层 zone
区,间 bay
取样杓 sampling spoon
去磷 dephosphorization
去锈 descaling
脱氧 deoxidation
脱氧剂 deoxidizer
脱氧剂 deoxidizing agent
全幅射高温计 total radiation pyrometer
全静钢 killed steel
全模法,f-m造模法 full-mold process(f-m process)
全熔解损耗 total melting loss
全塞孔 plug hole
全碳量 total carbon
缺陷 bug
裙鉰机 apron feeder
裙送机 apron conveyor
群模铸件 cluster
群状缩孔 dispersed shrinkage
燃炽点 kindling point
燃点 fire point
燃料 fuel
燃料比 fuel ratio
燃料气 fuel gas
燃料油 fuel oil
燃气炉 gas furance
燃烧 combustion
燃烧比 combustion ratio
燃烧瓷舟 combustion boat
燃烧带,燃烧区 combustion area,combustion zone
燃烧分析 combustion analysis
燃烧炉 combustion furnace
燃烧率 rate of combustion
燃烧气体 combustion gas
燃烧器 burner
燃烧室 combustion chamber
燃烧损耗 combustion loss
燃烧效率 combustion efficiency
燃烧装置 combustion apparatus
燃油炉 oil fired furnace
燃油器 oil burner
燃余残留物 residue after ignition
燃着点 point of ignition
染料渗透验法 dye penetrate test
扰动 turbulence
扰动输送机 vibratory conveyor
扰流 turbulent flow
扰流层振动输送机 turbulence-layer vibratory conveyor
热,炉次 heat
热板(造模用) hot plate
热变形(砂) hot deformation(sand)
热处理 heat treatment
热处理温度变化曲线 heat treatment cycle curve
热处理状态 as-heat-treated
热传导性 thermal conductivity
热传递 heat transfer
热脆性 hot shortness
热点 hot spot
热电偶 thermocouple
热分散 thermal break down
热分析 thermal analysis
热风 hot blast
热风熔铁炉 hot blast cupola
热敷法 hot coated process